作为常用的http协议服务器，Tomcat应用非常广泛。tomcat也是遵循Servelt协议的，Servelt协议可以让服务器与真实服务逻辑代码进行解耦。各自只需要关注Servlet协议即可。
对于tomcat是如何作为一个高性能的服务器的呢？你是不是也会有这样的疑问？
tomcat是如何接收网络请求？
如何做到高性能的http协议服务器？
tomcat从8.0往后开始使用了NIO非阻塞io模型，提高了吞吐量，本文的源码是tomcat 9.0.48版本
org.Apache.tomcat.util.NET.Acceptor实现了Runnable接口，在一个单独的线程中以死循环的方式一直进行socket的监听
线程的初始化及启动是在方法org.apache.tomcat.util.net.AbstractEndpoint#startAcceptorThread
有个很重要的属性org.apache.tomcat.util.net.AbstractEndpoint；同时实现了run方法，方法中主要有以下功能：
public void run() {
int errorDelay = 0;
try {
// Loop until we receive a shutdown command
while (!stopCalled) {
...
if (stopCalled) {
break;
}
state = AcceptorState.RUNNING;
try {
//if we have reached max connections, wAIt
// 如果连接超过了 8*1024，则线程阻塞等待; 是使用org.apache.tomcat.util.threads.LimitLatch类实现了分享锁(内部实现了AbstractQueuedSynchronizer)
// 请你注意到达最大连接数后操作系统底层还是会接收客户端连接，但用户层已经不再接收。
endpoint.countUpOrAwaitConnection();
// Endpoint might have been paused while waiting for latch
// If that is the case, don't accept new connections
if (endpoint.isPaused()) {
continue;
}
U socket = null;
try {
// Accept the next incoming connection from the server
// socket
// 抽象方法，不同的endPoint有不同的实现方法。NioEndPoint为例，实现方法为serverSock.accept()，这个方法主要看serverSock实例化时如果为阻塞，accept方法为阻塞；反之为立即返回，如果没有socket链接，则为null
socket = endpoint.serverSocketAccept();
} catch (Exception ioe) {
// We didn't get a socket
endpoint.countDownConnection();
if (endpoint.isRunning()) {
// Introduce delay if necessary
errorDelay = handleExceptionWithDelay(errorDelay);
// re-throw
throw ioe;
} else {
break;
}
}
// Successful accept, reset the error delay
errorDelay = 0;
// Configure the socket
if (!stopCalled && !endpoint.isPaused()) {
// setSocketOptions() will hand the socket off to
// an Appropriate processor if successful
// endPoint类的抽象方法，不同的endPoint有不同的实现。处理获取到的socketChannel链接，如果该socket链接能正常处理，那么该方法会返回true，否则为false
if (!endpoint.setSocketOptions(socket)) {
endpoint.closeSocket(socket);
}
} else {
endpoint.destroySocket(socket);
}
} catch (Throwable t) {
...
}
}
} finally {
stopLatch.countDown();
}
state = AcceptorState.ENDED;
}
再来看下org.apache.tomcat.util.net.NioEndpoint#setSocketOptions方法的具体实现(NioEndpoint为例)
这个方法中主要做的事：
protected boolean setSocketOptions(SocketChannel socket) {
NIOSocketWrapper socketWrapper = null;
try {
// Allocate channel and wrapper
// 优先使用已有的缓存nioChannel
NioChannel channel = null;
if (nioChannels != null) {
channel = nioChannels.pop();
}
if (channel == null) {
SocketBufferHandler bufhandler = new SocketBufferHandler(
socketProperties.getAppReadBufSize(),
socketProperties.getAppWriteBufSize(),
socketProperties.getDirectBuffer());
if (isSSLEnabled()) {
channel = new SecureNioChannel(bufhandler, this);
} else {
channel = new NioChannel(bufhandler);
}
}
// 将nioEndpoint与NioChannel进行包装
NioSocketWrapper newWrapper = new NioSocketWrapper(channel, this);
channel.reset(socket, newWrapper);
connections.put(socket, newWrapper);
socketWrapper = newWrapper;
// Set socket properties
// Disable blocking, polling will be used
// 设置当前链接的socket为非阻塞
socket.configureBlocking(false);
if (getUnixDomainSocketPath() == null) {
socketProperties.setProperties(socket.socket());
}
socketWrapper.setReadTimeout(getConnectionTimeout());
socketWrapper.setWriteTimeout(getConnectionTimeout());
socketWrapper.setKeepAliveLeft(NioEndpoint.this.getMaxKeepAliveRequests());
// 将包装后的nioChannel与nioEndpoint进行注册，注册到Poller，将对应的socket包装类添加到Poller的队列中，同时唤醒selector
poller.register(socketWrapper);
return true;
} catch (Throwable t) {
ExceptionUtils.handleThrowable(t);
try {
log.error(sm.getString("endpoint.socketOptionsError"), t);
} catch (Throwable tt) {
ExceptionUtils.handleThrowable(tt);
}
if (socketWrapper == null) {
destroySocket(socket);
}
}
// Tell to close the socket if needed
return false;
}
上一小节是接收到了socket请求，进行包装之后，将socket添加到了Poller的队列上，并可能唤醒了Selector，本小节就来看看，Poller是如何进行socket的轮询的。
首先org.apache.tomcat.util.net.NioEndpoint.Poller也是实现了Runnable接口，是一个可以单独启动的线程
初始化及启动是在org.apache.tomcat.util.net.NioEndpoint#startInternal
重要的属性：
再来看下具体处理逻辑，run方法的源码
public void run() {
// Loop until destroy() is called
while (true) {
boolean hasEvents = false;
try {
if (!close) {
// 去SynchronizedQueue事件队列中拉去，看是否已经有了事件，如果有，则返回true
// 如果从队列中拉取到了event(即上一步将NioSocketWrapper封装为PollerEvent添加到次队列中)，将socketChannel注册到Selector上，标记为SelectionKey.OP_READ，添加处理函数attachment(为Accetpor添加到Poller时的
// NioSocketWrapper)
hasEvents = events();
if (wakeupCounter.getAndSet(-1) > 0) {
// If we are here, means we have other stuff to do
// Do a non blocking select
keyCount = selector.selectNow();
} else {
keyCount = selector.select(selectorTimeout);
}
wakeupCounter.set(0);
}
if (close) {
events();
timeout(0, false);
try {
selector.close();
} catch (IOException ioe) {
log.error(sm.getString("endpoint.nio.selectorCloseFail"), ioe);
}
break;
}
// Either we timed out or we woke up, process events first
if (keyCount == 0) {
hasEvents = (hasEvents | events());
}
} catch (Throwable x) {
ExceptionUtils.handleThrowable(x);
log.error(sm.getString("endpoint.nio.selectorLoopError"), x);
continue;
}
Iterator<SelectionKey> iterator =
keyCount > 0 ? selector.selectedKeys().iterator() : null;
// Walk through the collection of ready keys and dispatch
// any active event.
// selector轮询获取已经注册的事件，如果有事件准备好，此时通过selectKeys方法就能拿到对应的事件
while (iterator != null && iterator.hasNext()) {
SelectionKey sk = iterator.next();
// 获取到事件后，从迭代器删除事件，防止事件重复轮询
iterator.remove();
// 获取事件的处理器，这个attachment是在event()方法中注册的，后续这个事件的处理，就交给这个wrapper去处理
NioSocketWrapper socketWrapper = (NioSocketWrapper) sk.attachment();
// Attachment may be null if another thread has called
// cancelledKey()
if (socketWrapper != null) {
processKey(sk, socketWrapper);
}
}
// Process timeouts
timeout(keyCount,hasEvents);
}
getStopLatch().countDown();
}
在这里，有一个很重要的方法，org.apache.tomcat.util.net.NioEndpoint.Poller#events()，他是从Poller的事件队列中获取Acceptor接收到的可用socket，并将其注册到Selector上
/**
* Processes events in the event queue of the Poller.
*
* @return <code>true</code> if some events were processed,
* <code>false</code> if queue was empty
*/
public boolean events() {
boolean result = false;
PollerEvent pe = null;
// 如果Acceptor将socket添加到队列中，那么events.poll()方法就能拿到对应的事件，否则拿不到就返回false
for (int i = 0, size = events.size(); i < size && (pe = events.poll()) != null; i++ ) {
result = true;
NioSocketWrapper socketWrapper = pe.getSocketWrapper();
SocketChannel sc = socketWrapper.getSocket().getIOChannel();
int interestOps = pe.getInterestOps();
if (sc == null) {
log.warn(sm.getString("endpoint.nio.nullSocketChannel"));
socketWrapper.close();
} else if (interestOps == OP_REGISTER) {
// 如果是Acceptor刚添加到队列中的事件，那么此时的ops就是OP_REGISTER
try {，
// 将次socket注册到selector上，标记为OP_READ事件，添加事件触发时处理函数socketWrapper
sc.register(getSelector(), SelectionKey.OP_READ, socketWrapper);
} catch (Exception x) {
log.error(sm.getString("endpoint.nio.registerFail"), x);
}
} else {
// ？？这里的逻辑，不清楚什么情况下会进入到这个分支里面
final SelectionKey key = sc.keyFor(getSelector());
if (key == null) {
// The key was cancelled (e.g. due to socket closure)
// and removed from the selector while it was being
// processed. Count down the connections at this point
// since it won't have been counted down when the socket
// closed.
socketWrapper.close();
} else {
final NioSocketWrapper attachment = (NioSocketWrapper) key.attachment();
if (attachment != null) {
// We are registering the key to start with, reset the fairness counter.
try {
int ops = key.interestOps() | interestOps;
attachment.interestOps(ops);
key.interestOps(ops);
} catch (CancelledKeyException ckx) {
cancelledKey(key, socketWrapper);
}
} else {
cancelledKey(key, socketWrapper);
}
}
}
if (running && !paused && eventCache != null) {
pe.reset();
eventCache.push(pe);
}
}
return result;
}
还有一个重要方法就是org.apache.tomcat.util.net.NioEndpoint.Poller#processKey，上一个方法是获取event，并注册到selector，那这个方法就是通过Selector获取到的数据准备好的event，并开始封装成对应的业务处理线程SocketProcessorBase，扔到线程池里开始处理
protected void processKey(SelectionKey sk, NioSocketWrapper socketWrapper) {
try {
if (close) {
cancelledKey(sk, socketWrapper);
} else if (sk.isValid()) {
if (sk.isReadable() || sk.isWritable()) {
if (socketWrapper.getSendfileData() != null) {
processSendfile(sk, socketWrapper, false);
} else {
unreg(sk, socketWrapper, sk.readyOps());
boolean closeSocket = false;
// Read goes before write
if (sk.isReadable()) {
//这里如果是异步的操作，就会走这里
if (socketWrapper.readOperation != null) {
if (!socketWrapper.readOperation.process()) {
closeSocket = true;
}
} else if (socketWrapper.readBlocking) {
// readBlocking默认为false
synchronized (socketWrapper.readLock) {
socketWrapper.readBlocking = false;
socketWrapper.readLock.notify();
}
} else if (!processSocket(socketWrapper, SocketEvent.OPEN_READ, true)) {
// 处理正常的事件，这里的processSocket就要正式开始处理请求了。
// 将对应的事件封装成对应的线程，然后交给线程池去处理正式的请求业务
closeSocket = true;
}
}
if (!closeSocket && sk.isWritable()) {
if (socketWrapper.writeOperation != null) {
if (!socketWrapper.writeOperation.process()) {
closeSocket = true;
}
} else if (socketWrapper.writeBlocking) {
synchronized (socketWrapper.writeLock) {
socketWrapper.writeBlocking = false;
socketWrapper.writeLock.notify();
}
} else if (!processSocket(socketWrapper, SocketEvent.OPEN_WRITE, true)) {
closeSocket = true;
}
}
if (closeSocket) {
cancelledKey(sk, socketWrapper);
}
}
}
} else {
// Invalid key
cancelledKey(sk, socketWrapper);
}
} catch (CancelledKeyException ckx) {
cancelledKey(sk, socketWrapper);
} catch (Throwable t) {
ExceptionUtils.handleThrowable(t);
log.error(sm.getString("endpoint.nio.keyProcessingError"), t);
}
}
上一步，Selector获取到了就绪的请求socket，然后根据socket注册的触发处理函数等，将这些数据进行封装，扔到了线程池里，开始具体的业务逻辑处理。本节就是从工作线程封装开始，org.apache.tomcat.util.net.SocketProcessorBase为工作线程类的抽象类，实现了Runnable接口，不同的Endpoint实现具体的处理逻辑，本节以NioEndpoint为例
以下为org.apache.tomcat.util.net.AbstractEndpoint#processSocket方法源码
/**
* Process the given SocketWrapper with the given status. Used to trigger
* processing as if the Poller (for those endpoints that have one)
* selected the socket.
*
* @param socketWrapper The socket wrapper to process
* @param event The socket event to be processed
* @param dispatch Should the processing be performed on a new
* container thread
*
* @return if processing was triggered successfully
*/
public boolean processSocket(SocketWrapperBase<S> socketWrapper,
SocketEvent event, boolean dispatch) {
try {
if (socketWrapper == null) {
return false;
}
// 优先使用已经存在的线程
SocketProcessorBase<S> sc = null;
if (processorCache != null) {
sc = processorCache.pop();
}
if (sc == null) {
sc = createSocketProcessor(socketWrapper, event);
} else {
sc.reset(socketWrapper, event);
}
// 获取线程池。线程池的初始化，是在Acceptor、Poller这两个单独线程启动之前创建
// tomcat使用了自定义的org.apache.tomcat.util.threads.TaskQueue，这块tomcat也进行了小的适配开发
// 核心线程为10个，最大200线程
Executor executor = getExecutor();
if (dispatch && executor != null) {
executor.execute(sc);
} else {
sc.run();
}
} catch (RejectedExecutionException ree) {
getLog().warn(sm.getString("endpoint.executor.fail", socketWrapper) , ree);
return false;
} catch (Throwable t) {
ExceptionUtils.handleThrowable(t);
// This means we got an OOM or similar creating a thread, or that
// the pool and its queue are full
getLog().error(sm.getString("endpoint.process.fail"), t);
return false;
}
return true;
}
上面的方法是得到了处理业务逻辑的线程SocketProcessorBase，NioEndpoint内部类org.apache.tomcat.util.net.NioEndpoint.SocketProcessor继承了这个抽象类，也就是具体的业务处理逻辑在org.apache.tomcat.util.net.NioEndpoint.SocketProcessor#doRun方法中，最终调用到我们的Servlet
protected void doRun() {
/*
* Do not cache and re-use the value of socketWrapper.getSocket() in
* this method. If the socket closes the value will be updated to
* CLOSED_NIO_CHANNEL and the previous value potentially re-used for
* a new connection. That can result in a stale cached value which
* in turn can result in unintentionally closing currently active
* connections.
*/
Poller poller = NioEndpoint.this.poller;
if (poller == null) {
socketWrapper.close();
return;
}
try {
int handshake = -1;
try {
// 握手相关判断逻辑
...
} catch (IOException x) {
...
}
// 三次握手成功了
if (handshake == 0) {
SocketState state = SocketState.OPEN;
// Process the request from this socket
// event为SocketEvent.OPEN_READ，这个变量是org.apache.tomcat.util.net.NioEndpoint.Poller#processKey方法赋值
if (event == null) {
state = getHandler().process(socketWrapper, SocketEvent.OPEN_READ);
} else {
// 这里就开始正式处理请求了
state = getHandler().process(socketWrapper, event);
}
if (state == SocketState.CLOSED) {
poller.cancelledKey(getSelectionKey(), socketWrapper);
}
} else if (handshake == -1 ) {
getHandler().process(socketWrapper, SocketEvent.CONNECT_FAIL);
poller.cancelledKey(getSelectionKey(), socketWrapper);
} else if (handshake == SelectionKey.OP_READ){
socketWrapper.registerReadInterest();
} else if (handshake == SelectionKey.OP_WRITE){
socketWrapper.registerWriteInterest();
}
} catch (CancelledKeyException cx) {
poller.cancelledKey(getSelectionKey(), socketWrapper);
} catch (VirtualmachineError vme) {
ExceptionUtils.handleThrowable(vme);
} catch (Throwable t) {
log.error(sm.getString("endpoint.processing.fail"), t);
poller.cancelledKey(getSelectionKey(), socketWrapper);
} finally {
socketWrapper = null;
event = null;
//return to cache
if (running && !paused && processorCache != null) {
processorCache.push(this);
}
}
}
NioEndpoint组件：Tomcat如何实现非阻塞I/O？
Java NIO浅析
来源：
https://www.cnblogs.com/chenzw93/p/16072325.html
京公网安备 11010802035086号